Complete Guide to Cleaning and Using the ProSolo™ Dental Delivery Unit

Complete Guide to Cleaning and Using the ProSolo™ Dental Delivery Unit

Recommended Cleaning Products & Solutions

Daily Cleaners

  • Enzymatic Cleaners:
    • EmPower (Metrex) - Excellent for daily line cleaning
    • ProEZ 2 (Certol) - Great for removing protein buildup
    • Vacusol Ultra (Schultz) - Specifically designed for dental vacuum lines

Surface Disinfectants

  • Wipes & Solutions:
    • CaviWipes (Metrex) - Ideal for external surfaces
    • DisCide Ultra Disinfecting Towelettes - Fast-acting and effective
    • BirexSE (Biotrol) - Gentle on surfaces but tough on pathogens

Water Line Treatment

  • Daily Treatment:
    • BluTab Waterline Treatment Tablets - Maintains clean lines
    • ICX Tablets (A-dec) - Prevents biofilm formation
  • Shock Treatment (Monthly):
    • Liquid Ultra (Vista) - Effective for deep cleaning
    • Sterilex Ultra Solutions - For stubborn biofilm removal

Step-by-Step Cleaning Procedures

Morning Setup (15 minutes)

  1. Fill fresh water reservoir with distilled water
  2. Add 1 BluTab tablet to reservoir
  3. Run water through all lines for 2 minutes
  4. Mix EmPower solution (1oz per quart of water)
  5. Run through suction lines for 1 minute
  6. Empty waste container

Between Patients (5 minutes)

  1. Put on fresh PPE (gloves, mask, eye protection)
  2. Draw 16oz of mixed EmPower solution through suction lines
  3. Wipe all surfaces with CaviWipes (2-minute contact time)
  4. Replace barrier protection

End of Day (30 minutes)

  1. Mix ProEZ 2 solution (2oz per quart)
  2. Run through suction lines for 3 minutes
  3. Empty and clean waste container with DisCide Ultra
  4. Remove and clean screen filter (rinse with warm water)
  5. Wipe unit down with fresh CaviWipes
  6. Empty water reservoir
  7. Run air through all lines to dry

Pro Tips from Experienced Users

Maintaining Suction Power

  • Clean screen filter twice daily for optimal performance
  • Use warmer water with enzymatic cleaners for better results
  • Run suction cleaner BEFORE emptying waste container
  • Never let waste container fill beyond 75% capacity

Preventing Common Issues

  • Replace O-rings every 6 months (use silicone-based lubricant)
  • Clean filter housing weekly with soft brush
  • Check voltage at setup location (requires stable 115V)
  • Keep spare screen filters on hand

Maximizing Efficiency

  • Set up mini-cleaning station in carrying case
  • Pre-mix cleaning solutions in marked containers
  • Use color-coded microfiber cloths for different areas
  • Keep log of cleaning/maintenance (required for inspections)

Troubleshooting Guide

Loss of Suction Power

  1. Check waste container seal
  2. Clean screen filter
  3. Verify voltage supply
  4. Run hot water through lines

Quick Fix: Keep spare screen filters and O-rings in unit case

Unusual Noise

  1. Check filter placement
  2. Verify level surface placement
  3. Inspect motor mounts
  4. Test different outlet

Quick Fix: Place unit on rubber mat to reduce vibration

Water Flow Issues

  1. Check for kinked lines
  2. Verify pump operation
  3. Clean inline water filter
  4. Test different water source

Quick Fix: Keep backup water lines in unit case

Emergency Kit Essentials

  • Spare screen filters (3-4)
  • Extra O-rings
  • Silicone lubricant
  • Basic tool kit (screwdrivers, pliers)
  • Backup water lines
  • Extra collection canister
  • Voltage tester

Storage Tips

  • Store unit upright in carrying case
  • Use desiccant packets in case
  • Keep in climate-controlled area
  • Clean thoroughly before extended storage
  • Label all cleaning solution containers
  • Maintain inventory of supplies

Supply Ordering Guide

Monthly Orders

  • Enzymatic cleaners
  • Surface disinfectants
  • Water treatment tablets
  • Barrier products

Quarterly Orders

  • Backup filters
  • O-rings
  • Lubricants
  • Basic tools

Annual Replacement

  • Water lines
  • Collection canister
  • Vacuum hoses
  • Power cord

Record Keeping

Maintain a log of:

  • Daily cleaning procedures
  • Maintenance activities
  • Part replacements
  • Repair history
  • Supply inventory

Safety Reminders

  • Never mix cleaning products
  • Use proper PPE always
  • Follow contact time guidelines
  • Maintain proper ventilation
  • Document all procedures
  • Train all users on protocols

Remember: Professional servicing is recommended annually to maintain optimal performance and extend unit life. Keep all cleaning products in original containers and maintain current SDS sheets for all products used.

Back to blog